Hifax TYC 791P YGYA BLK

LyondellBasell

Description

Hifax TYC 791P YGYA BLK high melt flow, 1,400 MPa flexural modulus, UV-stabilized, paintable, mineral-filled thermoplastic elastomeric olefin (TEO) resin has an excellent balance of properties and processability. It is typically used for automotive exterior ornamentation applications.

Availability

North America

Legend

SDS - Safety Data Sheet
PSB - Product Stewardship Bulletin

Product Data and Technical Information

Typical Properties

Melt Flow Rate (230 °C/2.16 kg) 28 g/10 min
Density (23 °C, Method A) 1.01 g/cm³
Flexural Modulus (23 °C) 1400 MPa
Tensile Stress at Yield (23 °C) 18 MPa
Notched Izod Impact Strength (23 °C) 23 kJ/m²
Notched Izod Impact Strength (0 °C) 7.2 kJ/m²
Notched Izod Impact Strength (-40 °C) 4.0 kJ/m²
Deflection Temperature Under Load (0.45 MPa, Unannealed) 98 °C
Deflection Temperature Under Load (1.80 MPa, Unannealed) 57 °C
Mold Shrinkage

Technical Data Sheet

Technical Data Sheet

Process

Injection Molding


Resin

Polypropylene Compounds


Applications

Automotive Parts, Exterior Automotive Applications


Prohibited Applications of Compounded Polyolefins:

The following applications and/or end uses are prohibited by LyondellBasell.  LyondellBasell will not solicit the sale of, or knowingly supply, product for use in the following applications:

FDA Class III medical devices, European Class III medical devices, Health Canada Class IV Medical Devices, applications involving permanent implantation into the body & life-sustaining medical applications